HJL360 HJ SIP with lubricators of other make
Please select a hotspot
to learn more.
HJL360 HJL360 Please select a hotspot
to learn more.
HJ SIP can be combined with lubricators of other make, enabling most of the same benefits of HJ SIP.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua
The cylinder lube oil is sprayed into the cylinder through the nozzle opening. By spraying the lube oil in tiny droplets, into the scavenging air swirl a large surface area of the liner is covered to ensure optimal distribution of the cylinder oil. This in turn, ensures proper utilisation of the oil.
The nozzle opening is turned at an angle and injects the oil upwards onto the upper part of the cylinder liner where it is most needed, overlapping the next HJ SIP injection point.
Adjustment of closing pressure (35-60 bar) of the HJ SIP valve is done by an adjustable screw on top of the pressure plug. The adjustable screw is kept in place by a lock cover and a screw.
The drain pipe (T) is for the leak oil internally in the HJ SIP valve and is connected to the return pipe where the oil will be recirculated into the system.
The Pressure Pipe (P), is the oil inlet side of the HJ SIP valve.
The pressurized oil is pumped from the lubricator.
A strainer is mounted in the inlet of the HJ SIP valve at delivery. This must be removed after 500 running hours.
HJ SIP valves work with lubricators of other make. It is possible to upgrade the existing lubrication system with HJ SIP valves and replace the non-return valves.
Please note that the HJ SIP valves require a different timing from traditional non-return valves.
It looks like you are using an older version of iOS (below 11). This website might not work or display correctly. We recommend you use iOS version 11 and onwards. You may choose to proceed viewing the solution.
PROCEED